ros1_bridge

The bridge is a “dual homed” program which acts as a ROS 1 node as well as a ROS 2 node at the same time. It can therefore subscribe to messages in one ROS version and publish them into the other ROS version.

The specific messages it is able to convert between ROS 1 and ROS 2 are determined at compile time. Automatic mapping rules are being applied based on the names. Additionally custom mapping rules can be provided.

How are ROS 1 and 2 messages associated with each other?

Automatic mapping between ROS 1 and 2 messages is performed based on the names.

In the first step ROS 1 packages ending with _msgs are associated with ROS 2 packages ending in either _msgs or _interfaces.

In the second step messages with the same name are associated with each other.

In the third step fields are associated with each other. If one of the two associated messages has fields which is are not part of the other message they are being ignored. If both messages have fields the other message does not contain it is assumed that the mapping is incomplete and no association is established.

If the package name, message name, and all field names and types are the same between a ROS 1 package and a ROS 2 package, and they satisfy the package suffix condition above, then the messages will automatically be associated with each other without additional specification. The bridge needs to be recompiled, after the ROS 1 and ROS 2 packages have been compiled and sourced, each in a separate workspace, for a total of three workspaces.

How can I specify custom mapping rule for messages?

Additional mapping rules can be provided by a ROS 2 package using a yaml file. Each mapping rule can have one of three types:

  1. A package mapping rule is defined by:

    • a ros1_package_name

    • a ros2_package_name (which must be the same as the ROS 2 package this mapping rule is defined in)

  2. A message mapping rule is defined by the attributes of a package mapping rule and:

    • a ros1_message_name

    • a ros2_message_name

  3. A field mapping rule is defined by the attributes of a message mapping rule and:

    • a dictionary fields_1_to_2 mapping ROS 1 field selections to ROS 2 field selections. A field selection is a sequence of field names separated by ., that specifies the path to a field starting from a message. For example starting from the message rosgraph_msgs/Log the field selection header.stamp specifies a path that goes through the field header of rosgraph_msgs/Log, that has a message of type std_msgs/Header, and ending up in the field stamp of std_msgs/Header, that has type time. All fields must be listed explicitly - not listed fields are not mapped implicitly when their names match.

Each mapping rule file contains a list of mapping rules.

How are ROS 1 and 2 services associated with each other?

Automatic mapping between ROS 1 and 2 services is performed similar to messages. Except that currently different field names are not supported.

How can I specify custom mapping rule for services?

In case of services, each mapping rule can have one of two types:

  1. A package mapping rule is defined by:

    • a ros1_package_name

    • a ros2_package_name (which must be the same as the ROS 2 package this mapping rule is defined in)

  2. A service name mapping rule is defined by the attributes of a package mapping rule and:

    • a ros1_service_name

    • a ros2_service_name

A custom field mapping is currently not supported for services.

How can I install mapping rule files?

The mapping rule files must be exported in the package.xml in order to be processed by this package:

<export>
  <ros1_bridge mapping_rules="my_mapping_rules.yaml"/>
</export>

The yaml files must also be installed in the CMakeLists.txt:

install(
  FILES my_mapping_rules.yaml
  DESTINATION share/${PROJECT_NAME})

Example mapping rules file

Example package mapping rule matching all messages with the same names and fields within a pair of packages:

-
  ros1_package_name: 'ros1_pkg_name'
  ros2_package_name: 'ros2_pkg_name'

Example message mapping rule matching a specific pair of messages with the same fields:

-
  ros1_package_name: 'ros1_pkg_name'
  ros1_message_name: 'ros1_msg_name'
  ros2_package_name: 'ros2_pkg_name'
  ros2_message_name: 'ros2_msg_name'

Example message field mapping rule a specific pair of messages with a custom mapping between the fields:

-
  ros1_package_name: 'ros1_pkg_name'
  ros1_message_name: 'ros1_msg_name'
  ros2_package_name: 'ros2_pkg_name'
  ros2_message_name: 'ros2_msg_name'
  fields_1_to_2:
    foo: 'foo'
    ros1_bar: 'ros2_bar'

Example service mapping rule matching all services with the same names and fields within a pair of packages:

-
  ros1_package_name: 'ros1_pkg_name'
  ros2_package_name: 'ros2_pkg_name'

Example service mapping rule matching a specific pair of services with the same fields:

-
  ros1_package_name: 'ros1_pkg_name'
  ros1_service_name: 'ros1_srv_name'
  ros2_package_name: 'ros2_pkg_name'
  ros2_service_name: 'ros2_srv_name'

Example service mapping rule matching a specific pair of services with a custom mapping between the fields. The mapping can optionally only define request_fields_1_to_2 or response_fields_1_to_2 if the other part has the same fields:

-
  ros1_package_name: 'ros1_pkg_name'
  ros1_service_name: 'ros1_srv_name'
  ros2_package_name: 'ros2_pkg_name'
  ros2_service_name: 'ros2_srv_name'
  request_fields_1_to_2:
    foo: 'foo'
    ros1_bar: 'ros2_bar'
  response_fields_1_to_2:
    foo: 'foo'
    ros1_bar: 'ros2_bar'

How does the bridge know about custom interfaces?

The ROS 1 and ROS 2 packages need to be in separate workspaces, so that each workspace can be sourced with its correponding ROS version. The bridge should be in its own workspace, as it will need to source both ROS 1 and ROS 2 versions.

Example workspace setup

Here we will call the ROS 1 workspace ros1_msgs_ws, the ROS 2 workspace ros2_msgs_ws, the workspace containing the bridge bridge_ws. For simplification, we will use matching names for the packages, messages, and fields of the custom interfaces on the ROS 1 and ROS 2 sides. We will call the actual package bridge_msgs in both the ROS 1 and the ROS 2 workspaces. That is, the name defined in CMakeLists.txt and package.xml in the package.

The directory layout looks like this:

.
├─ ros1_msgs_ws
│  └─ src
│     └─ bridge_msgs
│        └─ msg
│           └─ JointCommand.msg
├─ ros2_msgs_ws
│  └─ src
│     └─ bridge_msgs
│        ├─ msg
│        │  └─ JointCommand.msg
│        └─ # YAML file if your custom interfaces have non-matching names
└─ bridge_ws
   └─ src
      └─ ros1_bridge

The content of JointCommand.msg:

float64 position

The workspaces can be compiled as follows.

First, build the ROS 1 messages:

# Shell 1 (ROS 1)
. /opt/ros/melodic/setup.bash
# Or, on OSX, something like:
# . ~/ros_catkin_ws/install_isolated/setup.bash
cd <workspace-parent-path>/ros1_msgs_ws
catkin_make_isolated --install

Then build the ROS 2 messages:

# Shell 2 (ROS 2)
. /opt/ros/crystal/setup.bash
cd <workspace-parent-path>/ros2_msgs_ws
colcon build --packages-select bridge_msgs

Then build the bridge:

# Shell 3 (ROS 1 and ROS 2)
. /opt/ros/melodic/setup.bash
. /opt/ros/crystal/setup.bash
. <workspace-parent-path>/ros1_msgs_ws/install_isolated/setup.bash
. <workspace-parent-path>/ros2_msgs_ws/install/local_setup.bash
cd <workspace-parent-path>/bridge_ws
colcon build --packages-select ros1_bridge --cmake-force-configure

Verify the custom types were recognized by the bridge, by printing all pairs of bridged types. The custom types should be listed:

ros2 run ros1_bridge dynamic_bridge --print-pairs

Run the bridge, reusing shells from above:

# Shell 1 (ROS 1)
roscore

# Shell 2 (ROS 2)
. <workspace-parent-path>/ros2_msgs_ws/install/local_setup.bash
ros2 topic pub /joint_command bridge_msgs/JointCommand "{position: 0.123}"

# Shell 3 (ROS 1 and ROS 2)
. <workspace-parent-path>/bridge_ws/install/local_setup.bash
ros2 run ros1_bridge dynamic_bridge --bridge-all-topics

# Shell 4 (ROS 1)
. /opt/ros/melodic/setup.bash
. <workspace-parent-path>/ros1_msgs_ws/install_isolated/setup.bash
# Verify the topic is listed
rostopic list
rostopic echo /joint_command

Known Issues

  • Currently, --bridge-all-topics may be needed to bridge correctly. This has been tested and reported to be required when at least one custom message type is being published in ROS 2 and subscribed in ROS 1. It has also been informally reported to be needed for built-in message types under the same condition. Once the mapping is established with the ROS 1 master, it may be possible to rerun the bridge without --bridge-all-topics, in order to selectively bridge topics. However, this is not guaranteed.

  • /rosout logging, which maps from rosgraph_msgs/Log to rcl_interfaces/Log, requires field selection. This works with OpenSplice and Connext, but not with Fast-RTPS. For it to work with Fast-RTPS, this bug needs to be fixed. As a workaround, run the subscriber with --disable-rosout-logs.